Powerful Road Roller SEM510-1

Category:

Standard total rated power: 97.5kW

Rated speed: 2,200r/min

Turning radius inside drum edge: 5,990mm

Parameter

Model
Model SEM510
Engine Specification
Emission China StageII
Std Rated Power-Gross 97.5kW
Rated Speed 2,200r/min
Composite Work Cycle Fuel Consumption (l/hour) 560/1,400-1,600N.m/rpm
Ambient Capability-HA Sea Level 49Deg C
Ambient Capability-Cold Weather -10Deg C
Operating Specifications
Machine Mass w/Std Config 10,000+3%kg
Weight at Drum w/Std Config 5,900+3%kg
Weight on Rear Axle 4,100kg
Static Linear Load 217N/cm
Max. Grade Ability w/o vibbration 45%
Articulated Angle 33±1°
Turning Radius Inside Drum Edge 5,990mm
Compaction Width 2,130mm
Travel Speed
Lo Range 0 to 5.5km/h
Hi Range 0 to 12km/h
Hydraulic Cycle Time
Full Turn Time 6±0.5s
Vibratory System
Freqency-Hi/Lo 33/30HZ
Amplitude-Hi/Lo 1.80/0.90mm
Centrifugal Force-Hi/Lo 215/130kN
Dimensions
Machine Dimensions[L*W*H] 5,815*2,290*3,130mm
Oscillation Angle 10±1°
Wheelbase 2,900mm
Tread Width 1,600mm
Drum Width 2,130mm
Drum Diameter 1,590mm
Tire Specs
Tire Specs 23.1-26 12PR12
Tire Pressure Setting 0.35Mpa

Description

Powerful Road Roller SEM510-1 Vibration system
* Pod-type vibration system provides better performance and reliability
* The movable steel ball is enclosed inside the eccentric wheel, and the position of the center of gravity is adjusted through
the direction of rotation to achieve the purpose of adjusting the amplitude.
* Stable vibration, smooth amplitude switching, reducing the impact on the vibration motor and prolonging the lifespan
* Fully sealed eccentric wheel, no pollution, prolong bearing life. Maintenance-free within 2 years/2000 hours, reducing
maintenance costs

PowerfulRoad Roller SEM510-1 cooling system
* Suction fan, fresh low-temperature air enters from the rear of the whole machine and passes through the radiator to the engine
to ensure the heat dissipation effect
* Optional high temperature cooling system, can work under 50 degrees of ambient temperature

PowerfulRoad Roller SEM510-1 Hydraulic system
* Closed hydraulic circuit, hydraulic transmission efficiency is 20% higher than that of open circuit
* The pumps and motors of world-renowned brands form a closed circulation system to reduce oil
* Probability of contamination, higher system cleanliness, prolonging the service life of the hydraulic system
* The vibration system has higher pressure and less energy loss
* The pipeline layout is simpler, increasing the maintenance space
* Only need to be equipped with a smaller volume hydraulic oil tank, reducing maintenance costs
* The pressure measuring joints are all designed to the vibration pump, which improves the service life of the pressure measuring
joints

PowerfulRoad Roller SEM510-1 Electronically controlled engine
* SEM518/520 uses WP6G175E301 (129kW), SEM522 uses WP6G190E301 (140kW)
* Emissions meet the national three standards

PowerfulRoad Roller SEM510-1 dash board
* The three-level fault alarm system can accurately judge the severity of the fault at the fault point according to the alarm
level
* During use, real-time detection of abnormal conditions of multiple systems to prevent failures
* Vibration frequency meter displays the compaction frequency in real time, monitors the compaction effect and possible frequency
drop phenomenon; through the frequency change, timely judge the possible failure of the hydraulic system

Cab
* Manually flip the cab as standard
* Optional hydraulic tilting cab
* Rearrange the panel to make the operation switch more user-friendly
* Knob type electronic throttle, flexible and more reliable

Contact Us Today

Get quote, solution or any question? Click the button to contact with us! We are always here.